Now, using reference your old seat motorcycle, seat molded curves using the band saw or jigsaw. Rem

New motorcycle seats can be costly and difficult to find. However, with the right tools and process them for yourself is possible. Your biggest cost will be a spare seat assembly. You can buy the materials for the cover and foam for almost nothing. Level of difficulty: Easy
A seat assembly for replacement, a large piece of paper, a band saw or jigsaw, ach foam technologies a block of foam for seats, seat cover material (see Resources), standard utility scissors and a stapler.
Buy a seat for motorcycle parts to which you're doing the seat. Make sure it fits properly and removes any foam or staples to spare if it is a re-seat assembly. 2
Cut foam contour seat assembly using a band saw or jigsaw big. Do it slowly and carefully, trying to cut lines are as accurate and smooth as possible. 4
Now, using reference your old seat motorcycle, seat molded curves using the band saw or jigsaw. Remember you have to do exactly the same as the previous seat. You can give the shape you want. Keep in mind things like the place for a companion and comfortable curves. 5
Decide what type of material you will use the seat cover. Be sure to think about slipping and style along with everything considered. For example, leather covers work well with road bikes classic style, while the rubber and plastic covers go well with dirt bikes. 6
Trace the outline of your seat mount your leaf material. Using a standard scissors, cut the sheet between 7 to 10 inches larger than your path to completely cover the foam and seat. 7
Starting at the top of the seat assembly, the material strip on the assembly and start staple to this bottom. Keep the item as tight as possible at all times. You stretch to fit the assembling without folds or wrinkles. Place staples every few inches.
How to make a pad for motorcycle seat
How to make a journal of adjusting entries for accrued expenses not payable
How to motorcycle fender